Telehandler Parts

Telehandler Parts - A telescopic handler or telehandler is a machine which is generally utilized in agricultural and industrial applications. It has the same look to a forklift and even functions in a similar manner, even if, the telehandler is more of a crane than a lift truck. It has a telescopic boom which can lengthen forward and upward from the vehicle. The boom has the capability to fit one of several attachments including muck grab, pallet forks, a bucket or a lift table.

Pallet forks are the most popular accessory meant for the telehandler. This machine is most often utilized for moving loads to and from areas which a typical forklift would find inaccessible. Telehandlers are specially helpful for placing loads on rooftops for instance, or for removing palletized cargo from with a trailer. Many of the tasks which a telehandler can complete will otherwise require a crane and this piece of equipment can be expensive, impractical and not always time efficient.

As the boom raises or extends while bearing a load, it also acts as a lever. Despite the counterweights in the back, this causes the machine to become increasingly unbalanced; thus, the advantage of the telehandler is truly its greatest limitation. As the working radius increases, the lifting capacity decreases. The working radius is defined as the distance between the center of the load and the front of the wheels.

The telehandler with a 5000 lb capacity for example, with a retractable boom can safely lift as little as 400 lb at a fully extended boom at a low boom angle. Equivalent machinery with a lift capacity of 5000 lbs and a retractable boom which could support as much as 10,000 lb with the boom raises to approximately 70 degrees. The operator has a load chart to be able to help determine whether a specific lifting job could be completed in an efficient and safe manner. This chart considers the boom angle, the weight and height.

Many telehandlers come equipped with a computer which utilizes sensors to be able to monitor the motor vehicle. These sensors will alert the operator and some are capable of cutting off further control input if the limits of the motor vehicle are exceeded. Several telehandler kinds are also outfitted with front outriggers which are referred to as mobile cranes. These significantly extend the lifting capability of the machinery while it is stationary.


Click to Download the pdf

Forklift Parts

Parts for Zoom Boom

Zoom Boom Parts - A boom truck is frequently recognized by the cable and telephone business vans that have the elongated arm folded over their roofs. Commonly, a bucket-like apparatus sits at the extension of extendable arms. Sometimes termed a cherry picker, or an aerial boom truck, a bucket vehicle has an extendable boom mounted the roof or bed. It...

More

---

Mast Chain

Mast Chains - Leaf Chains have different applications and are regulated by ANSI. They are utilized for tension linkage, lift truck masts and for low-speed pulling, and as balancers between counterweight and head in some machine devices. Leaf chains are sometimes even referred to as Balance Chains. Features and Construction Made of a simple pin construction and link plate, steel...

More

---

Genie Forklift Part

Genie Forklift Parts - Genie Industries prides itself with the belief of lifting individuals and resources higher, extending beyond the products they manufacture. A global company that is greatly tied to their customers and enjoys reflecting the spirit of relationship with all they achieve. Genie Industries strives to help clientele erect their operations no matter how large or small the...

More

---

Truss Boom for Telehandler

Telehandler Truss Boom - A telehandler or telescopic handler is a machine which is normally used in agricultural and industrial applications. It has a similar look to a forklift and even functions in a similar manner, even if, the telehandler is more of a crane than a lift truck. It has a telescopic boom that can lengthen forward and upward...

More

---

Parts for Electric Forklifts

Electric Forklift Parts - The most common method to charge the industrial batteries which power electric forklifts is to make use of a charging station. These pieces of equipment normally contain two 8-foot cords which attach to the battery. Newer units are equipped along with an automatic charge shut off. This charges the battery hard for 6 hours, afterward at...

More

---

Hydraulic Scissor Lift Parts

Hydraulic Scissor Lift Parts - A scissor lift is a kind of platform lift that moves vertically. The lift table is moved in a vertical motion because of criss-cross folding supports which are linked in what is referred to as a pantograph. The platform could propel vertically because of the application of pressure to the outside of the lowest set...

More

---

Nissan Forklift Attachments

Nissan Forklift Attachments - Nissan takes immense delight in reaching overall customer satisfaction, when their client is experiencing one of their numerous products including cars, trucks, and lift trucks. Nissan Motor Co. Ltd is the parent company to Nissan's Forklift division. They are committed to delivering high value and detail-oriented quality standards to their clients. Incorporating a prosperous heritage combined...

More

---

Fork Mounted Buckets

Fork Mounted Bucket - When companies evaluate all of their expenditures and want to lessen overhead, unnecessary equipment rentals and acquisitions are the first item to be removed. Lots of construction businesses feel that loaders have become a cumbersome expense and many of their jobs could be done utilizing the effectiveness and versatility provided by forklift buckets. A lift truck...

More

---