SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - Unavoidably, lift truck components would eventually wear out and need replacing. The alternative of buying brand new components can become costly so another idea is to purchase used parts. This can save a lot of cash in the end. It is a great idea to acquire used forklift components that have been remanufactured. These components will ensure that you are getting components that will work for a long time and be productive.
Broken or worn parts which are reproduced are a very cost effective solution as opposed to rebuilding. With rebuilding parts, just the components which are worn out or broken get replaced, which means that other wearable components may break down soon after purchase.
Remanufactured parts are cleaned after being taken apart and have the unusable components replaced. This method could provide the best guarantee for second-hand components. All wearable parts are replaced regardless of age or wear which is another rationale why remanufactured components overall run so much better. Whichever part within the part is brand new and this provides much longer life to the used part. Based on the lift truck components which are being redone, the cleaning process and the complete remanufacturing process will vary.
The engines are cleaned after a complete disassembly. Several engine components such as rings, pistons, spark plugs, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are another item which is oven cleaned after being disassembled. The transmission is then washed. A thorough inspection is done to check for any cracks. Bushings, seals and bearings are all replaced. Normally, the replacement parts utilized on transmission parts meet OEM specifications.
A few lift truck parts such as the water pump, torque converters, the alternator, the starter and steer axles can be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card could likewise be reproduced with replacing all aged and worn out parts. Not like different forklift parts the control card could only have the worn and aged parts replaced.
Parts which are remanufactured have to be meticulously checked upon reassembly to guarantee they are in good condition prior to being sold. When obtaining these components, it is a good idea to be certain that they have undergone all of the proper testing and inspections. On certain larger components like for instance engines, transmissions and steer axles, OEM specification replacement components must be utilized.
The forklift dealer could ensure that the components they have remanufactured meet the OEM specifications. This would likewise guarantee the parts meet industry standards. A lot of details go into remanufacturing second-hand parts. This attention to detail provides more serviceability out of reproduced components than the components that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Grand Rapids, Michigan
forkliftpartsgrandrapids.com
Email Us
About Us